Latin America and Caribbean's Aluminium Alloy Plates, Sheets and Strip Market to Experience 1.6% CAGR Growth from 2024 to 2035 - News and Statistics - IndexBox

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

IndexBox has just published a new report: Latin America and the Caribbean - Aluminium Alloy Plates, Sheets and Strip of Thickness over 0.2 mm - Market Analysis, Forecast, Size, Trends And Insights.

The article discusses the rising consumption trend of aluminium alloy plates, sheets, and strip in Latin America and the Caribbean. With an expected CAGR of +1.6% in volume and +2.6% in value from 2024 to 2035, the market is forecasted to reach 2.4M tons and $10.6B respectively by 2035.

Driven by increasing demand for aluminium alloy plates, sheets and strip of thickness over 0.2 mm in Latin America and the Caribbean, the market is expected to continue an upward consumption trend over the next decade. Market performance is forecast to retain its current trend pattern, expanding with an anticipated CAGR of +1.6% for the period from 2024 to 2035, which is projected to bring the market volume to 2.4M tons by the end of 2035.

In value terms, the market is forecast to increase with an anticipated CAGR of +2.6% for the period from 2024 to 2035, which is projected to bring the market value to $10.6B (in nominal wholesale prices) by the end of 2035.

In 2024, consumption of aluminium alloy plates, sheets and strip of thickness over 0.2 mm in Latin America and the Caribbean totaled 2M tons, growing by 11% against 2023. The total consumption volume increased at an average annual rate of +2.3% over the period from 2013 to 2024; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. Over the period under review, consumption of reached the maximum volume in 2024 and is expected to retain growth in the near future.

The revenue of the market for aluminium alloy plates, sheets and strip of thickness over 0.2 mm in Latin America and the Caribbean expanded notably to $8B in 2024, with an increase of 14% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). The total consumption indicated noticeable growth from 2013 to 2024: its value increased at an average annual rate of +4.3% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, consumption decreased by -1.2% against 2022 indices. The level of consumption peaked at $8.1B in 2022; however, from 2023 to 2024, consumption failed to regain momentum.

The countries with the highest volumes of consumption in 2024 were Brazil (892K tons), Mexico (730K tons) and Venezuela (151K tons), with a combined 89% share of total consumption. Guatemala, Colombia, Paraguay and Argentina lagged somewhat behind, together comprising a further 7.9%.

From 2013 to 2024, the most notable rate of growth in terms of mm, amongst the key consuming countries, was attained by Paraguay (with a CAGR of +48.3%), while mm for the other leaders experienced more modest paces of growth.

In value terms, the largest aluminium alloy plate, sheet and strip of thickness over 0.2 mm markets in Latin America and the Caribbean were Mexico ($3.7B), Brazil ($3.1B) and Venezuela ($401M), with a combined 90% share of the total market. Colombia, Paraguay, Guatemala and Argentina lagged somewhat behind, together comprising a further 7.4%.

Paraguay, with a CAGR of +57.5%, recorded the highest rates of growth with regard to market size in terms of the main consuming countries over the period under review, while mm for the other leaders experienced more modest paces of growth.

The countries with the highest levels of aluminium alloy plate, sheet and strip of thickness over 0.2 mm per capita consumption in 2024 were Mexico (5.4 kg per person), Paraguay (5 kg per person) and Venezuela (4.9 kg per person).

From 2013 to 2024, the most notable rate of growth in terms of mm, amongst the key consuming countries, was attained by Paraguay (with a CAGR of +46.4%), while mm for the other leaders experienced more modest paces of growth.

Production of aluminium alloy plates, sheets and strip of thickness over 0.2 mm amounted to 1M tons in 2024, approximately equating 2023 figures. In general, production, however, recorded a slight decrease. The pace of growth was the most pronounced in 2015 with an increase of 9.9%. As a result, production reached the peak volume of 1.3M tons. From 2016 to 2024, production of growth failed to regain momentum.

In value terms, production of aluminium alloy plates, sheets and strip of thickness over 0.2 mm expanded modestly to $3.6B in 2024 estimated in export price. The total output value increased at an average annual rate of +1.1% over the period from 2013 to 2024; the trend pattern remained relatively stable, with somewhat noticeable fluctuations throughout the analyzed period. The most prominent rate of growth was recorded in 2022 when the production volume increased by 17%. The level of production peaked at $3.7B in 2015; however, from 2016 to 2024, production remained at a lower figure.

Brazil (886K tons) remains the largest aluminium alloy plate, sheet and strip of thickness over 0.2 mm producing country in Latin America and the Caribbean, comprising approx. 86% of total volume. Moreover, production of aluminium alloy plates, sheets and strip of thickness over 0.2 mm in Brazil exceeded the figures recorded by the second-largest producer, Venezuela (148K tons), sixfold.

In Brazil, production of aluminium alloy plates, sheets and strip of thickness over 0.2 mm remained relatively stable over the period from 2013-2024.

In 2024, imports of aluminium alloy plates, sheets and strip of thickness over 0.2 mm in Latin America and the Caribbean soared to 1.1M tons, growing by 23% against the previous year's figure. Over the period under review, imports recorded a remarkable increase. The pace of growth appeared the most rapid in 2015 when imports increased by 116% against the previous year. The volume of import peaked in 2024 and is expected to retain growth in years to come.

In value terms, imports of aluminium alloy plates, sheets and strip of thickness over 0.2 mm skyrocketed to $4.3B in 2024. In general, imports continue to indicate a resilient expansion. The pace of growth was the most pronounced in 2022 when imports increased by 40% against the previous year. As a result, imports reached the peak of $4.8B. From 2023 to 2024, the growth of imports of remained at a lower figure.

Mexico represented the major importer of aluminium alloy plates, sheets and strip of thickness over 0.2 mm in Latin America and the Caribbean, with the volume of imports amounting to 741K tons, which was approx. 69% of total imports in 2024. It was distantly followed by Brazil (109K tons), committing a 10% share of total imports. Guatemala (43K tons), Colombia (40K tons), Paraguay (37K tons), Argentina (37K tons) and Chile (36K tons) took a minor share of total imports.

Imports into Mexico increased at an average annual rate of +8.9% from 2013 to 2024. At the same time, Paraguay (+48.4%), Colombia (+10.2%), Argentina (+9.8%), Guatemala (+7.5%), Chile (+5.6%) and Brazil (+5.2%) displayed positive paces of growth. Moreover, Paraguay emerged as the fastest-growing importer imported in Latin America and the Caribbean, with a CAGR of +48.4% from 2013-2024. While the share of Mexico (+4 p.p.) and Paraguay (+3.4 p.p.) increased significantly in terms of the total imports from 2013-2024, the share of Brazil (-3.9 p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, Mexico ($3B) constitutes the largest market for imported aluminium alloy plates, sheets and strip of thickness over 0.2 mm in Latin America and the Caribbean, comprising 71% of total imports. The second position in the ranking was held by Brazil ($362M), with an 8.5% share of total imports. It was followed by Colombia, with a 3.8% share.

In Mexico, imports of aluminium alloy plates, sheets and strip of thickness over 0.2 mm expanded at an average annual rate of +10.5% over the period from 2013-2024. In the other countries, the average annual rates were as follows: Brazil (+2.8% per year) and Colombia (+11.8% per year).

The import price in Latin America and the Caribbean stood at $3,935 per ton in 2024, which is down by -3% against the previous year. Overall, the import price, however, recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2014 an increase of 123%. As a result, import price attained the peak level of $7,963 per ton. From 2015 to 2024, the import prices remained at a somewhat lower figure.

Average prices varied somewhat amongst the major importing countries. In 2024, major importing countries recorded the following prices: in Paraguay ($4,258 per ton) and Mexico ($4,100 per ton), while Brazil ($3,311 per ton) and Guatemala ($3,369 per ton) were amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Paraguay (+6.5%), while the other leaders experienced more modest paces of growth.

In 2024, exports of aluminium alloy plates, sheets and strip of thickness over 0.2 mm in Latin America and the Caribbean skyrocketed to 116K tons, increasing by 25% compared with 2023. Total exports indicated buoyant growth from 2013 to 2024: its volume increased at an average annual rate of +9.2% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, exports decreased by -0.9% against 2022 indices. The most prominent rate of growth was recorded in 2014 when exports increased by 75%. Over the period under review, the exports of reached the maximum at 118K tons in 2022; however, from 2023 to 2024, the exports stood at a somewhat lower figure.

In value terms, exports of aluminium alloy plates, sheets and strip of thickness over 0.2 mm surged to $385M in 2024. In general, exports showed a buoyant expansion. The growth pace was the most rapid in 2022 when exports increased by 93%. As a result, the exports attained the peak of $489M. From 2023 to 2024, the growth of the exports of remained at a lower figure.

Brazil prevails in mm structure, recording 103K tons, which was near 89% of total exports in 2024. It was distantly followed by Mexico (10K tons), achieving an 8.9% share of total exports.

From 2013 to 2024, average annual rates of growth with regard to aluminium alloy plate, sheet and strip of thickness over 0.2 mm exports from Brazil stood at +8.8%. At the same time, Mexico (+16.4%) displayed positive paces of growth. Moreover, Mexico emerged as the fastest-growing exporter exported in Latin America and the Caribbean, with a CAGR of +16.4% from 2013-2024. From 2013 to 2024, the share of Mexico increased by +4.5 percentage points.

In value terms, Brazil ($349M) remains the largest aluminium alloy plate, sheet and strip of thickness over 0.2 mm supplier in Latin America and the Caribbean, comprising 91% of total exports. The second position in the ranking was held by Mexico ($27M), with a 6.9% share of total exports.

From 2013 to 2024, the average annual rate of growth in terms of value in Brazil totaled +10.2%.

In 2024, the export price in Latin America and the Caribbean amounted to $3,302 per ton, reducing by -5.2% against the previous year. In general, the export price, however, continues to indicate a relatively flat trend pattern. The pace of growth appeared the most rapid in 2022 an increase of 87% against the previous year. As a result, the export price attained the peak level of $4,161 per ton. From 2023 to 2024, the export prices remained at a somewhat lower figure.

Average prices varied somewhat amongst the major exporting countries. In 2024, amid the top suppliers, the country with the highest price was Brazil ($3,375 per ton), while Mexico amounted to $2,550 per ton.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by Brazil (+1.4%).

Source: IndexBox Market Intelligence Platform

This report provides an in-depth analysis of the market for aluminium alloy plate, sheet and strip of thickness over 0.2 mm in Latin America and the Caribbean. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

Making Data-Driven Decisions to Grow Your Business

A Quick Overview of Market Performance

Understanding the Current State of The Market and its Prospects

Finding New Products to Diversify Your Business

Choosing the Best Countries to Establish Your Sustainable Supply Chain

Choosing the Best Countries to Boost Your Export

The Latest Trends and Insights into The Industry

The Largest Import Supplying Countries

The Largest Destinations for Exports

The Largest Producers on The Market and Their Profiles

The Largest Markets And Their Profiles